-
The maximum operating temperature range for the S29AL016J70FFI022 is -40°C to +85°C.
-
The hold signal (HOLD#) should be asserted low to pause the current operation and enter a low-power state. De-asserting HOLD# resumes the operation.
-
The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal (CLK).
-
The device density and organization can be determined by reading the device ID and manufacturer ID through the ID read command (90h).
-
The write protection (WP#) signal is used to prevent accidental writes to the device. When WP# is asserted low, the device is write-protected.
