S29GL01GP12TFI010 datasheet by Spansion

S29GL01GP12TFI010 Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for this flash memory?
  The maximum operating temperature range for the S29GL01GP12TFI010 is -40°C to +85°C.
• How do I handle the hold signal (HOLD#) during read and write operations?
  The HOLD# signal should be asserted low to pause the current operation and de-asserted high to resume the operation. During hold, the device will tri-state its outputs and ignore any input signals.
• What is the recommended power-up sequence for this device?
  The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal. The device should be in a standby state (CE# high) during power-up.
• How do I determine the device density and configuration?
  The device density and configuration can be determined by reading the device ID and configuration registers. The device ID can be read using the JEDEC ID command (0x9F), and the configuration registers can be read using the Read Configuration Register command (0x35).
• What is the purpose of the Write Protection (WP#) signal?
  The WP# signal is used to protect the status register and the configuration registers from being written. When WP# is low, these registers are write-protected, and when WP# is high, they can be written.