The maximum operating temperature range for the S29GL256P11FAIV20 is -40°C to +85°C.
The HOLD# signal should be asserted low to pause the current read or write operation. De-asserting HOLD# resumes the operation from where it was paused.
The WP# signal is used to prevent accidental writes to the device. When WP# is asserted low, the device is write-protected, and any write operations will be ignored.
The device density and organization can be determined by reading the Device ID (0x01C2) and the Density ID (0x14) through the Read ID (RDID) command.
The recommended power-up sequence is to apply VCC first, followed by VCCQ, and then the clock signal (CLK).
