S29GL512P12FFIV10 datasheet by Spansion

S29GL512P12FFIV10 Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for this device?
  The maximum operating temperature range for the S29GL512P12FFIV10 is -40°C to +85°C.
• How do I handle the hold signal (HOLD#) during read and write operations?
  The HOLD# signal should be asserted low to pause the current operation and de-asserted high to resume the operation. During hold, the device will tri-state its outputs and ignore any input signals.
• What is the purpose of the write protection (WP#) pin?
  The WP# pin is used to prevent accidental writes to the status register and the block protection bits. When WP# is low, the status register and block protection bits are write-protected.
• How do I determine the device density and organization?
  The device density and organization can be determined by reading the device ID and revision ID through the ID read command (90h). The device ID for the S29GL512P12FFIV10 is 01h, and the revision ID is 02h.
• What is the recommended power-up sequence for this device?
  The recommended power-up sequence is to apply VCC first, followed by VCCQ, and then the clock signal. The device should be powered up in a monotonic sequence, with VCC and VCCQ reaching their final values before the clock signal is applied.