The maximum operating temperature range for the S29GL512S10FHI020 is -40°C to +85°C.
The HOLD# signal should be asserted low to pause the current operation and de-asserted high to resume the operation. During this time, the device will tri-state its outputs.
The WP# pin is used to prevent accidental writes to the device. When WP# is low, the device is in write-protect mode, and all write operations are inhibited.
The device density and configuration can be determined by reading the Device ID and Configuration Register (CIDR) at address 0x00000000.
The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal. The device is not guaranteed to function correctly if powered up in any other sequence.
