S34ML01G100BHI000 datasheet by Spansion

S34ML01G100BHI000 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the S34ML01G100BHI000?
  The recommended operating voltage range for the S34ML01G100BHI000 is 2.7V to 3.6V.
• How do I handle the hold and hold acknowledge signals (HOLD and HOLDA) in my design?
  The HOLD and HOLDA signals are used for asynchronous data transfer. To handle them, ensure that your design can generate a HOLD signal to the flash memory when it needs to access the bus, and that the flash memory can respond with a HOLDA signal to acknowledge the request.
• What is the purpose of the WP (Write Protect) pin, and how do I use it?
  The WP pin is used to prevent accidental writes to the flash memory. To use it, connect the WP pin to VCC to enable write protection, or connect it to GND to disable write protection.
• How do I perform a sector erase operation on the S34ML01G100BHI000?
  To perform a sector erase operation, send the sector erase command (0x20) followed by the address of the sector to be erased. The device will then erase the entire sector.
• What is the maximum number of erase cycles supported by the S34ML01G100BHI000?
  The S34ML01G100BHI000 supports up to 100,000 erase cycles per sector.