S34ML04G104BHI010 datasheet by Spansion

S34ML04G104BHI010 Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for this flash memory?
  The maximum operating temperature range for the S34ML04G104BHI010 is -40°C to +85°C.
• How do I handle the hold signal (HOLD#) during read and write operations?
  The HOLD# signal should be asserted low to pause the current operation and de-asserted high to resume the operation. During hold, the device will tri-state its outputs and ignore any input signals.
• What is the recommended power-up sequence for this device?
  The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal. This ensures proper device initialization and prevents latch-up conditions.
• How do I determine the optimal write buffer size for my application?
  The optimal write buffer size depends on the specific application requirements, such as data transfer rate, latency, and power consumption. A larger write buffer can improve performance but increases power consumption, while a smaller buffer reduces power consumption but may impact performance.
• What is the purpose of the WP# (Write Protect) signal, and how do I use it?
  The WP# signal is used to protect the device from accidental writes. When WP# is asserted low, the device is write-protected, and any write operations will be ignored. De-asserting WP# high allows write operations to proceed normally.