SA636DK/01,112 datasheet by NXP Semiconductors

SA636DK/01,112 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SA636DK/01,112?
  The recommended operating voltage range for the SA636DK/01,112 is 2.7V to 5.5V.
• How do I ensure the SA636DK/01,112 is properly powered on?
  To ensure proper power-on, connect the VCC pin to a stable voltage source, and make sure the voltage ramp-up time is less than 1ms.
• What is the purpose of the BYPASS pin, and how should it be connected?
  The BYPASS pin is used to connect an external capacitor to improve the power supply rejection ratio (PSRR). Connect a 10nF to 100nF capacitor between the BYPASS pin and the VCC pin.
• How do I configure the gain of the SA636DK/01,112?
  The gain of the SA636DK/01,112 can be configured by connecting external resistors between the GAIN pin and the VCC or GND pins. Refer to the datasheet for specific gain settings and resistor values.
• What is the maximum input signal amplitude that the SA636DK/01,112 can handle?
  The maximum input signal amplitude that the SA636DK/01,112 can handle is 2.5Vpp differential or 1.25Vpp single-ended.