SC16IS752IPW,112 datasheet by NXP Semiconductors

SC16IS752IPW,112 Frequently Asked Questions (FAQs)

• What is the maximum baud rate supported by SC16IS752IPW,112?
  The SC16IS752IPW,112 supports baud rates up to 5 Mbps.
• Can I use SC16IS752IPW,112 as a UART or USART?
  Yes, the SC16IS752IPW,112 can be used as both a UART (Universal Asynchronous Receiver-Transmitter) and a USART (Universal Synchronous Asynchronous Receiver-Transmitter).
• How do I configure the SC16IS752IPW,112 for 9-bit data transmission?
  To configure the SC16IS752IPW,112 for 9-bit data transmission, set the M1 and M0 bits in the LCR (Line Control Register) to '11' and set the WLS (Word Length Select) bits to '11' for 9-bit data transmission.
• What is the purpose of the RTS (Request to Send) and CTS (Clear to Send) signals in SC16IS752IPW,112?
  The RTS and CTS signals are used for flow control in the SC16IS752IPW,112. The RTS signal is used by the transmitter to request permission to send data, and the CTS signal is used by the receiver to indicate when it is ready to receive data.
• Can I use the SC16IS752IPW,112 in a multi-drop configuration?
  Yes, the SC16IS752IPW,112 can be used in a multi-drop configuration, where multiple devices are connected to a single bus. However, this requires careful consideration of the bus topology and signal integrity.