Quad UART for 3.3 V and 5 V supply voltage - Application: Data Communication ; Function: Receivers/Transmitters ; Number of pins: 68 ; Operating temperature: -40~85 Cel; Receiver/Transmitter type: Quad UARTs; Package: SOT188-2 (PLCC68); Container: Tube Dry Pack
The recommended operating voltage range for SC28L194A1A,512 is 2.7V to 5.5V, with a typical voltage of 3.3V.
The UART interface on SC28L194A1A,512 can be configured using the UART Control Register (UCR). The UCR register allows you to set the baud rate, data bits, parity, and stop bits. Refer to the datasheet for specific register settings.
The maximum data transfer rate of SC28L194A1A,512 is 5 Mbps.
SC28L194A1A,512 has built-in error detection and correction mechanisms, such as parity and checksum. You can also implement software-based error handling using interrupts and error flags. Refer to the datasheet for specific error handling mechanisms.
Yes, SC28L194A1A,512 is 5V tolerant, meaning it can accept 5V logic levels on its inputs. However, the output voltage levels will be limited to the supply voltage (VCC).
SC28L194A1A,512 datasheet
by NXP Semiconductors
