The recommended operating temperature range is -40°C to 105°C.
Ensure a stable power supply with a voltage range of 1.71V to 1.89V, and a decoupling capacitor of at least 100nF between VDD and VSS.
The maximum clock frequency supported is 100 MHz.
Configure the device by setting the MODE pin high for I2C or low for SPI. Additionally, set the SCL/CLK pin as an input for I2C or as an output for SPI.
The WAKEUP pin is used to wake up the device from a low-power state. It can be connected to a push-button or a GPIO pin to trigger the wake-up event.
