The recommended operating temperature range for the SM320C6201BGLPS20 is -40°C to 100°C. However, it's essential to note that the device can operate at temperatures beyond this range, but with reduced performance and reliability.
To ensure reliable booting from an external flash memory, make sure to follow the recommended boot mode configuration, use a reliable flash memory device, and ensure that the boot loader is correctly programmed. Additionally, verify that the flash memory is properly connected to the device and that the clock signals are stable.
The SM320C6201BGLPS20 can support clock frequencies up to 200 MHz. However, the actual clock frequency may be limited by the specific application, board design, and operating conditions.
To optimize power consumption on the SM320C6201BGLPS20, use the low-power modes (e.g., IDLE, STANDBY, and HALT) whenever possible, reduce the clock frequency, minimize the use of peripherals, and optimize the software to reduce switching activity. Additionally, consider using power-saving features like dynamic voltage and frequency scaling.
When designing a PCB for the SM320C6201BGLPS20, consider the device's thermal requirements, ensure proper decoupling and bypassing, use a solid ground plane, and follow the recommended layout guidelines for the device's pins and peripherals. Additionally, consider using a 4-layer or 6-layer PCB to minimize noise and ensure signal integrity.
SM320C6201BGLPS20 datasheet
by Texas Instruments
