Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img SN54AS244AJ datasheet by Texas Instruments

    • SN54AS244 - Octal Buffers And Line Drivers With 3-State Outputs 20-CDIP -55 to 125
    • Original
    • No
    • Yes
    • Active
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    SN54AS244AJ datasheet preview

    SN54AS244AJ Frequently Asked Questions (FAQs)

    • The maximum operating frequency of the SN54AS244AJ is 100 MHz, but it can vary depending on the load capacitance and the output current.
    • To ensure signal integrity, use a low-impedance PCB layout, minimize trace lengths, and use termination resistors to match the impedance of the transmission line. Additionally, consider using a signal integrity analysis tool to simulate the signal behavior.
    • Yes, the SN54AS244AJ is compatible with 3.3V systems, but the output voltage will be limited to 3.3V. Ensure that the input voltage is within the recommended range of 4.5V to 5.5V for proper operation.
    • To avoid latch-up or damage, ensure that the power rails are sequenced such that the VCC rail is powered up before the input signals, and the input signals are stable before the VCC rail is powered down.
    • Use a star topology for the power and ground connections, keep the input and output traces short and away from each other, and use a ground plane to reduce EMI and noise. Additionally, consider using shielding and filtering components to further reduce EMI and noise.
    Supplyframe Tracking Pixel