SN65HVD3085EDGK datasheet by Texas Instruments

SN65HVD3085EDGK Frequently Asked Questions (FAQs)

• What is the maximum cable length supported by the SN65HVD3085EDGK?
  The maximum cable length supported by the SN65HVD3085EDGK is approximately 100 meters, but this can vary depending on the specific application and environment.
• How do I ensure electromagnetic compatibility (EMC) with the SN65HVD3085EDGK?
  To ensure EMC, follow proper PCB layout and design guidelines, use shielding and grounding techniques, and consider using common-mode chokes or ferrite beads to reduce EMI emissions.
• What is the recommended termination scheme for the SN65HVD3085EDGK?
  The recommended termination scheme is a 120-ohm differential termination resistor at the receiving end of the bus, and a 1-kohm pull-up resistor to VCC at the transmitting end.
• How do I handle hot-swapping with the SN65HVD3085EDGK?
  To handle hot-swapping, use a hot-swap controller or a power switch with overcurrent protection, and ensure that the device is powered down before disconnecting or connecting the bus.
• What is the maximum data rate supported by the SN65HVD3085EDGK?
  The SN65HVD3085EDGK supports data rates up to 1 Mbps, but the actual data rate may be limited by the specific application and environment.