The maximum cable length supported by the SN65LBC179ADG4 is dependent on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths up to 100 meters at a data rate of 100 Mbps.
To ensure signal integrity when using the SN65LBC179ADG4, it is recommended to follow proper PCB layout and design guidelines, such as using differential pairs, minimizing trace lengths, and using shielding and grounding techniques to reduce electromagnetic interference (EMI).
Yes, the SN65LBC179ADG4 is rated for operation over an industrial temperature range of -40°C to 85°C, making it suitable for use in industrial applications.
The SN65LBC179ADG4 can be configured for half-duplex or full-duplex operation by setting the appropriate pins and registers. For half-duplex operation, the TXEN pin should be tied low, while for full-duplex operation, the TXEN pin should be tied high. Additionally, the device's registers should be programmed accordingly to enable or disable the transmitter and receiver.
The power consumption of the SN65LBC179ADG4 is dependent on the specific application and operating conditions. However, according to the datasheet, the typical power consumption is around 150 mW at a supply voltage of 3.3 V and a data rate of 100 Mbps.
SN65LBC179ADG4 datasheet
by Texas Instruments
