The maximum operating frequency of the SN65LVCP23PW is 100 MHz, but it can operate up to 200 MHz with reduced signal amplitude and slew rate.
To ensure signal integrity, use a controlled impedance PCB, keep signal traces short and away from noise sources, and use termination resistors as recommended in the datasheet.
Yes, the SN65LVCP23PW is compatible with 3.3V systems, but ensure that the VCC supply voltage is within the recommended range of 2.3V to 3.6V.
The power consumption of the SN65LVCP23PW depends on the operating frequency and output load. Typically, it consumes around 10mA to 20mA at 100 MHz with a 50-ohm load.
The SN65LVCP23PW is rated for operation up to 85°C, but it can be used in higher temperature environments with derating. Consult the datasheet for specific derating guidelines.