Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img SN65LVCP23PW datasheet by Texas Instruments

    • 2 x 2 LVPECL Crosspoint Switch
    • Original
    • Yes
    • Yes
    • Active
    • 5A991.B.1
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    SN65LVCP23PW datasheet preview

    SN65LVCP23PW Frequently Asked Questions (FAQs)

    • The maximum operating frequency of the SN65LVCP23PW is 100 MHz, but it can operate up to 200 MHz with reduced signal amplitude and slew rate.
    • To ensure signal integrity, use a controlled impedance PCB, keep signal traces short and away from noise sources, and use termination resistors as recommended in the datasheet.
    • Yes, the SN65LVCP23PW is compatible with 3.3V systems, but ensure that the VCC supply voltage is within the recommended range of 2.3V to 3.6V.
    • The power consumption of the SN65LVCP23PW depends on the operating frequency and output load. Typically, it consumes around 10mA to 20mA at 100 MHz with a 50-ohm load.
    • The SN65LVCP23PW is rated for operation up to 85°C, but it can be used in higher temperature environments with derating. Consult the datasheet for specific derating guidelines.
    Supplyframe Tracking Pixel