SN65LVDS1DBVTG4 datasheet by Texas Instruments

SN65LVDS1DBVTG4 Frequently Asked Questions (FAQs)

• What is the maximum cable length supported by the SN65LVDS1DBVTG4?
  The maximum cable length supported by the SN65LVDS1DBVTG4 is approximately 10 meters (33 feet) at a data rate of 655 Mbps. However, this length can vary depending on the specific application, cable quality, and noise environment.
• How do I ensure signal integrity with the SN65LVDS1DBVTG4?
  To ensure signal integrity with the SN65LVDS1DBVTG4, it is recommended to use a differential pair for the LVDS signals, keep the signal traces short and well-matched, and use a common-mode choke or ferrite bead to filter out electromagnetic interference (EMI).
• What is the power consumption of the SN65LVDS1DBVTG4?
  The power consumption of the SN65LVDS1DBVTG4 is approximately 135 mW (typical) at a supply voltage of 3.3 V and a data rate of 655 Mbps. However, this value can vary depending on the specific application and operating conditions.
• Can the SN65LVDS1DBVTG4 be used in a multi-point configuration?
  No, the SN65LVDS1DBVTG4 is designed for point-to-point connections only. It is not suitable for multi-point configurations due to the lack of a built-in multiplexer or arbiter.
• What is the maximum data rate supported by the SN65LVDS1DBVTG4?
  The maximum data rate supported by the SN65LVDS1DBVTG4 is 655 Mbps. However, the device can also operate at lower data rates, such as 270 Mbps or 135 Mbps, depending on the specific application requirements.