The maximum cable length supported by the SN65LVDS9637BDR is approximately 10 meters (33 feet) at a data rate of 1.485 Gbps. However, this length can vary depending on the specific application, cable quality, and environmental conditions.
To ensure signal integrity with the SN65LVDS9637BDR, it is recommended to follow proper PCB design guidelines, use high-quality cables and connectors, and implement proper termination and filtering techniques. Additionally, the device's built-in features such as pre-emphasis and de-emphasis can be used to improve signal quality.
Yes, the SN65LVDS9637BDR can be used in a multi-point configuration, but it requires careful consideration of the system design and signal routing to ensure that the signal integrity and timing requirements are met.
The power consumption of the SN65LVDS9637BDR varies depending on the operating frequency and mode. Typically, the device consumes around 150-200 mW of power when operating at 1.485 Gbps. However, this value can be reduced to around 50-70 mW when operating at lower frequencies or in power-down mode.
The SN65LVDS9637BDR has a built-in clock recovery circuit, but it requires an external clock recovery capacitor (CRC) to be connected between the CLKOUT pin and the VCC pin. The value of the CRC depends on the specific application and operating frequency.
SN65LVDS9637BDR datasheet
by Texas Instruments
