The maximum cable length supported by the SN65LVEP11DGKR is dependent on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths up to 100 meters at a data rate of 100 Mbps.
To ensure signal integrity with the SN65LVEP11DGKR, it is recommended to follow proper PCB layout and design guidelines, such as using differential pairs, minimizing trace lengths, and using shielding and grounding techniques. Additionally, the use of high-quality cables and connectors can also help to minimize signal degradation.
Yes, the SN65LVEP11DGKR is suitable for use in industrial and automotive applications due to its operating temperature range of -40°C to 125°C and its ability to withstand electromagnetic interference (EMI) and electrostatic discharge (ESD). However, it is recommended to consult the datasheet and application notes for specific guidance on using the device in these environments.
The SN65LVEP11DGKR can be configured for half-duplex or full-duplex operation by setting the mode pins (MODE0 and MODE1) accordingly. For half-duplex operation, set MODE0 = 0 and MODE1 = 0. For full-duplex operation, set MODE0 = 1 and MODE1 = 1. Consult the datasheet for more information on mode pin settings and operation.
The power consumption of the SN65LVEP11DGKR depends on the operating mode and data rate. In typical operating conditions, the device consumes around 150 mA at 100 Mbps. However, this can vary depending on the specific application and operating conditions. Consult the datasheet for more information on power consumption and power management.
SN65LVEP11DGKR datasheet
by Texas Instruments
