SN65LVEP11DR datasheet by Texas Instruments

SN65LVEP11DR Frequently Asked Questions (FAQs)

• What is the maximum cable length supported by the SN65LVEP11DR?
  The maximum cable length supported by the SN65LVEP11DR is dependent on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths up to 100 meters at a data rate of 100 Mbps.
• How do I ensure signal integrity with the SN65LVEP11DR?
  To ensure signal integrity with the SN65LVEP11DR, it is recommended to follow proper PCB layout and design guidelines, such as using differential pairs, minimizing trace lengths, and using signal shielding. Additionally, the device's built-in features such as slew rate control and output pre-emphasis can be used to optimize signal quality.
• Can the SN65LVEP11DR be used in industrial temperature ranges?
  Yes, the SN65LVEP11DR is rated for operation in industrial temperature ranges from -40°C to 85°C, making it suitable for use in industrial and automotive applications.
• How do I configure the SN65LVEP11DR for different data rates?
  The SN65LVEP11DR can be configured for different data rates by adjusting the values of the external resistors connected to the device's rate select pins. The specific resistor values required for different data rates can be found in the device's datasheet.
• Is the SN65LVEP11DR compatible with other PHY devices?
  The SN65LVEP11DR is a IEEE 802.3u compliant PHY device, making it compatible with other IEEE 802.3u compliant PHY devices. However, compatibility with specific devices should be verified through testing and validation.