The maximum operating frequency of the SN74ABTH16245DL is 100 MHz.
To ensure signal integrity, use a low-impedance PCB design, keep signal traces short, and use termination resistors as needed. Also, follow the recommended layout guidelines in the datasheet.
Yes, the SN74ABTH16245DL is compatible with 3.3V systems. However, ensure that the input voltage (VCC) is within the recommended range of 2.7V to 3.6V.
The power consumption of the SN74ABTH16245DL depends on the operating frequency and input voltage. At 100 MHz and 3.3V, the typical power consumption is around 150 mW.
To handle bus contention, use a bus arbiter or a multiplexer to ensure that only one device drives the bus at a time. Also, use pull-up or pull-down resistors as needed to prevent bus floating.