SN74ACT00D datasheet by Texas Instruments

SN74ACT00D Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the SN74ACT00D can handle?
  The SN74ACT00D can handle clock frequencies up to 100 MHz.
• How do I ensure that the SN74ACT00D is properly powered?
  The SN74ACT00D requires a single 5V power supply (VCC) and a ground connection (GND). Ensure that the power supply is stable and within the recommended operating range.
• What is the propagation delay of the SN74ACT00D?
  The typical propagation delay of the SN74ACT00D is around 10-15 ns, but this can vary depending on the operating conditions and load capacitance.
• Can I use the SN74ACT00D in a 3.3V system?
  While the SN74ACT00D is specified for 5V operation, it can be used in a 3.3V system with some limitations. However, the output voltage levels may not be compatible with 3.3V logic, and the noise margin may be reduced.
• How do I handle the heat generated by the SN74ACT00D?
  The SN74ACT00D is a low-power device, but it can still generate heat. Ensure good airflow around the device, and consider using a heat sink if the device is operated at high frequencies or with high loads.