SN74ACT1073DW datasheet by Texas Instruments

SN74ACT1073DW Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74ACT1073DW?
  The recommended operating voltage range for the SN74ACT1073DW is 4.5V to 5.5V, although it can operate as low as 3.5V with reduced performance.
• How do I handle the power-up and power-down sequencing of the SN74ACT1073DW?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
• What is the maximum clock frequency that the SN74ACT1073DW can handle?
  The maximum clock frequency that the SN74ACT1073DW can handle is 100 MHz, although this may vary depending on the specific application and operating conditions.
• How do I ensure that the SN74ACT1073DW is properly terminated to prevent signal reflections?
  It is recommended to use a series terminator (e.g. 33 ohms) at the far end of the transmission line to prevent signal reflections. Additionally, the input signals should be properly terminated to match the impedance of the transmission line.
• What is the maximum current that the SN74ACT1073DW can sink or source?
  The maximum current that the SN74ACT1073DW can sink or source is 24 mA per output pin, although this may be limited by the power supply and operating conditions.