SN74ACT1073DWR datasheet by Texas Instruments

SN74ACT1073DWR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74ACT1073DWR?
  The recommended operating voltage range for the SN74ACT1073DWR is 4.5V to 5.5V, although it can operate as low as 3.5V with reduced performance.
• How do I handle the power-up and power-down sequencing for the SN74ACT1073DWR?
  It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
• What is the maximum clock frequency that the SN74ACT1073DWR can handle?
  The maximum clock frequency that the SN74ACT1073DWR can handle is 100 MHz, although this may vary depending on the specific application and operating conditions.
• How do I ensure that the SN74ACT1073DWR is properly terminated to prevent signal reflections?
  It is recommended to use a termination resistor (e.g. 50 ohms) at the end of the transmission line to prevent signal reflections and ensure signal integrity.
• Can I use the SN74ACT1073DWR in a 3.3V system?
  Yes, the SN74ACT1073DWR can be used in a 3.3V system, but it may require additional voltage translation or level shifting to ensure compatibility with 3.3V logic levels.