SN74ACT1284DWR datasheet by Texas Instruments

SN74ACT1284DWR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74ACT1284DWR?
  The recommended operating voltage range for the SN74ACT1284DWR is 4.5V to 5.5V, with a typical voltage of 5V.
• How do I handle the input pins when they are not in use?
  When the input pins are not in use, they should be tied to a valid logic level (either VCC or GND) to prevent them from floating and causing unwanted behavior.
• What is the maximum frequency of operation for the SN74ACT1284DWR?
  The maximum frequency of operation for the SN74ACT1284DWR is 100 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the output signals are properly terminated?
  To ensure that the output signals are properly terminated, a pull-up or pull-down resistor should be used, and the output should be connected to a load that is within the recommended capacitive load range.
• What is the power consumption of the SN74ACT1284DWR?
  The power consumption of the SN74ACT1284DWR depends on the operating frequency and voltage, but typically it is around 20-30 mA at 5V and 50 MHz.