Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img SN74AHC16373DL datasheet by Texas Instruments

    • 16-BIT TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
    • Scan
    • No
    • Obsolete
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    SN74AHC16373DL datasheet preview

    SN74AHC16373DL Frequently Asked Questions (FAQs)

    • The recommended operating voltage range for the SN74AHC16373DL is 2.0 V to 5.5 V.
    • It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
    • The maximum clock frequency that the SN74AHC16373DL can handle is 100 MHz.
    • The SN74AHC16373DL requires proper termination to ensure signal integrity. It is recommended to use a 50-ohm termination resistor at the output of the device, and to ensure that the transmission line is properly matched to the output impedance of the device.
    • The maximum output current that the SN74AHC16373DL can sink or source is 24 mA.
    Supplyframe Tracking Pixel