SN74ALS04BDBR datasheet by Texas Instruments

SN74ALS04BDBR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74ALS04BDBR?
  The recommended operating voltage range for the SN74ALS04BDBR is 4.5V to 5.5V, although it can operate as low as 3V with reduced performance.
• How do I handle the input pins when they are not in use?
  When the input pins are not in use, they should be tied to a valid logic level (either VCC or GND) to prevent them from floating and causing unwanted behavior.
• What is the maximum frequency of operation for the SN74ALS04BDBR?
  The maximum frequency of operation for the SN74ALS04BDBR is typically around 100MHz, although this can vary depending on the specific application and operating conditions.
• Can I use the SN74ALS04BDBR in a 3.3V system?
  Yes, the SN74ALS04BDBR can be used in a 3.3V system, but it may not provide the same level of performance as it would at 5V. Additionally, the output voltage levels may not be compatible with 3.3V logic.
• How do I ensure that the SN74ALS04BDBR is properly decoupled?
  To ensure proper decoupling, a 0.1uF ceramic capacitor should be placed as close as possible to the VCC pin, and a 10uF electrolytic capacitor should be placed near the device to filter out any noise on the power supply.