The maximum operating frequency of the SN74ALVC16245DL is 100 MHz, but it can vary depending on the specific application and operating conditions.
To ensure signal integrity, use proper PCB layout techniques, such as impedance matching, signal routing, and decoupling. Additionally, consider using series termination resistors and/or parallel termination resistors to reduce signal reflections.
The recommended power-up sequence is to apply power to VCC before applying signals to the inputs. This ensures that the device is properly initialized and minimizes the risk of latch-up or other unexpected behavior.
Yes, the SN74ALVC16245DL can be used in a 3.3V system. However, ensure that the input signals are within the recommended voltage range (0.8V to 3.6V) and that the output signals are properly terminated to prevent signal degradation.
To handle bus contention, use bus holders or bus keepers to maintain the last valid state of the bus. Alternatively, use a bus arbiter or a multiplexer to control access to the bus and prevent contention.
SN74ALVC16245DL datasheet
by Texas Instruments
