SN74ALVCH16501DGGR datasheet by Texas Instruments

SN74ALVCH16501DGGR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74ALVCH16501DGGR?
  The recommended operating voltage range for the SN74ALVCH16501DGGR is 1.65 V to 3.6 V.
• How do I ensure signal integrity when using the SN74ALVCH16501DGGR?
  To ensure signal integrity, use a low-impedance PCB design, keep signal traces short, and use termination resistors as needed. Also, follow the recommended layout guidelines in the datasheet.
• Can I use the SN74ALVCH16501DGGR in a 5V system?
  No, the SN74ALVCH16501DGGR is not recommended for use in a 5V system. The maximum recommended operating voltage is 3.6V, and exceeding this voltage may cause damage to the device.
• How do I handle power sequencing when using the SN74ALVCH16501DGGR?
  Power sequencing is not critical for the SN74ALVCH16501DGGR, but it's recommended to power up the VCC pin before the input signals to prevent unwanted output states.
• What is the maximum clock frequency supported by the SN74ALVCH16501DGGR?
  The maximum clock frequency supported by the SN74ALVCH16501DGGR is 100 MHz.