SN74AS11D datasheet by Texas Instruments

SN74AS11D Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the SN74AS11D can handle?
  The SN74AS11D can handle clock frequencies up to 100 MHz.
• How do I ensure that the SN74AS11D is properly powered?
  The SN74AS11D requires a power supply voltage (VCC) of 4.5V to 5.5V, and it is recommended to use a decoupling capacitor of 0.1uF to 1uF between VCC and GND to ensure proper power supply decoupling.
• What is the maximum current that the SN74AS11D can sink or source?
  The SN74AS11D can sink or source up to 24mA of current per output pin.
• How do I handle the asynchronous reset input (CLR) of the SN74AS11D?
  The CLR input should be tied to VCC through a pull-up resistor (e.g. 1kΩ) to ensure that the device is not inadvertently reset. A capacitor (e.g. 100nF) can also be added in parallel to the pull-up resistor to filter out noise.
• What is the propagation delay of the SN74AS11D?
  The propagation delay of the SN74AS11D is typically around 10ns to 15ns, depending on the operating conditions and load capacitance.