Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img SN74AS823ANT datasheet by Texas Instruments

    • 9 Bit Bus-Interface Flip-Flop with 3-State Outputs
    • Original
    • Yes
    • No
    • Obsolete
    • 8542.39.00.01
    • 8542.39.00.00
    • Find it at Findchips.com

    SN74AS823ANT datasheet preview

    SN74AS823ANT Frequently Asked Questions (FAQs)

    • The recommended operating voltage range for the SN74AS823ANT is 4.5V to 5.5V, with a typical operating voltage of 5V.
    • It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
    • The maximum clock frequency that the SN74AS823ANT can handle is 100 MHz, but this can vary depending on the specific application and operating conditions.
    • The SN74AS823ANT requires proper termination to ensure signal integrity and prevent reflections. A 50-ohm termination resistor should be used at the output of the device, and the input signals should be terminated with a 50-ohm resistor to ground.
    • The maximum output current that the SN74AS823ANT can drive is 24 mA per output pin, but this can vary depending on the specific application and operating conditions.
    Price & Stock Powered by Findchips Logo
    Supplyframe Tracking Pixel