SN74HC373DBR datasheet by Texas Instruments

SN74HC373DBR Frequently Asked Questions (FAQs)

• What is the maximum frequency of operation for the SN74HC373DBR?
  The maximum frequency of operation for the SN74HC373DBR is 50 MHz.
• How do I ensure that the output is not corrupted during power-up or power-down?
  To ensure that the output is not corrupted during power-up or power-down, it is recommended to use an external pull-up or pull-down resistor on the output pins, and to use a power-on reset circuit to initialize the device.
• What is the recommended operating voltage range for the SN74HC373DBR?
  The recommended operating voltage range for the SN74HC373DBR is 2V to 6V, with a typical operating voltage of 5V.
• How do I handle the latch enable (LE) input?
  The latch enable (LE) input should be tied to a logic high (VCC) to enable the latch function, or to a logic low (GND) to disable the latch function.
• What is the propagation delay time for the SN74HC373DBR?
  The propagation delay time for the SN74HC373DBR is typically 10 ns, but can vary depending on the operating voltage and temperature.