The maximum operating frequency of the SN74HC4078AN is 10 MHz, but it can vary depending on the specific application and operating conditions.
It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
The recommended operating voltage range for the SN74HC4078AN is 2V to 6V, with a typical operating voltage of 5V. Operating the device outside of this range may affect its performance and reliability.
It is recommended to use a 0.1uF ceramic capacitor between the VCC pin and GND pin, and a 10uF electrolytic capacitor between the VCC pin and GND pin, to ensure proper decoupling and noise reduction.
The maximum input voltage that can be applied to the SN74HC4078AN is 7V, regardless of the operating voltage. Exceeding this voltage may cause damage to the device.