SN74HC573AQDWRQ1 datasheet by Texas Instruments

SN74HC573AQDWRQ1 Frequently Asked Questions (FAQs)

• What is the maximum frequency of operation for the SN74HC573AQDWRQ1?
  The maximum frequency of operation for the SN74HC573AQDWRQ1 is 50 MHz.
• How do I ensure that the output is not corrupted during power-up or power-down?
  To ensure that the output is not corrupted during power-up or power-down, it is recommended to use a pull-up or pull-down resistor on the output pins to prevent unwanted voltage levels.
• What is the recommended operating voltage range for the SN74HC573AQDWRQ1?
  The recommended operating voltage range for the SN74HC573AQDWRQ1 is 2V to 6V.
• How do I handle the latch enable (LE) input?
  The latch enable (LE) input should be tied to a valid logic level (either high or low) to ensure proper operation. Leaving the LE input floating can cause unpredictable behavior.
• What is the maximum current that the SN74HC573AQDWRQ1 can sink or source?
  The maximum current that the SN74HC573AQDWRQ1 can sink or source is 25 mA per pin.