Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img SN74HC574PW datasheet by Texas Instruments

    • SN74HC574 - Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs 20-TSSOP -40 to 85
    • Original
    • No
    • Obsolete
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Find it at Findchips.com

    SN74HC574PW datasheet preview

    SN74HC574PW Frequently Asked Questions (FAQs)

    • The maximum clock frequency of the SN74HC574PW is 100 MHz.
    • To ensure that the outputs are in a high-impedance state during power-up, connect the OE (output enable) pin to VCC through a pull-up resistor.
    • The recommended operating voltage range for the SN74HC574PW is 2V to 6V.
    • To handle asynchronous inputs, use a debouncing circuit or a synchronizer to ensure that the inputs are synchronized with the clock signal.
    • The maximum current that the SN74HC574PW can sink or source is 25 mA per output pin.
    Price & Stock Powered by Findchips Logo
    Supplyframe Tracking Pixel