Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img SN74HCT374PWR datasheet by Texas Instruments

    • Octal EDGE-Triggered D-Type Flip-Flops with 3-State Outputs
    • Original
    • Yes
    • Yes
    • Active
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    SN74HCT374PWR datasheet preview

    SN74HCT374PWR Frequently Asked Questions (FAQs)

    • The maximum clock frequency of the SN74HCT374PWR is 40 MHz, but it can vary depending on the system design and capacitive loading.
    • To ensure that the output signals are not distorted or skewed, it is recommended to use a low-skew clock distribution network, minimize the capacitive loading, and use a suitable termination scheme.
    • The recommended power-on sequence for the SN74HCT374PWR is to apply power to the VCC pin first, followed by the input signals, and then the clock signal.
    • To handle the thermal dissipation of the SN74HCT374PWR, it is recommended to use a heat sink, ensure good airflow, and follow the thermal design guidelines provided in the datasheet.
    • Yes, the SN74HCT374PWR can be used in a 3.3V system, but it is recommended to use a voltage regulator to ensure a stable 5V supply to the device.
    Supplyframe Tracking Pixel