The maximum operating frequency of the SN74LS322AN is typically around 30-40 MHz, but it can vary depending on the specific application and operating conditions.
It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
The recommended operating voltage range for the SN74LS322AN is 4.75V to 5.25V, with a typical operating voltage of 5V.
The SN74LS322AN requires proper termination to prevent signal reflections and ensure reliable operation. This can be achieved by using a termination resistor (e.g. 50 ohms) at the output of the device, and/or using a transmission line with a characteristic impedance of 50 ohms.
The maximum current that the SN74LS322AN can sink or source is typically around 20-30 mA, depending on the specific output pin and operating conditions.
