SN74LS367AD datasheet by Texas Instruments

SN74LS367AD Frequently Asked Questions (FAQs)

• What is the maximum operating frequency of the SN74LS367AD?
  The maximum operating frequency of the SN74LS367AD is 30 MHz, but it can vary depending on the load capacitance and the output current.
• How do I ensure signal integrity when using the SN74LS367AD?
  To ensure signal integrity, use a low-impedance output driver, keep the output traces short, and use a termination resistor to match the impedance of the transmission line.
• Can I use the SN74LS367AD in a 3.3V system?
  The SN74LS367AD is a 5V device, but it can be used in a 3.3V system with some limitations. The output voltage will be reduced, and the device may not meet the specified timing parameters.
• How do I handle power sequencing when using the SN74LS367AD?
  To avoid latch-up or damage, ensure that the power supply voltage (VCC) is applied before the input signals, and that the input signals are stable before the clock signal is applied.
• What is the recommended layout and routing for the SN74LS367AD?
  Use a symmetrical layout, keep the input and output traces separate, and avoid crossing signal lines to minimize crosstalk and noise.