Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img SN74LV123AD datasheet by Texas Instruments

    • Dual Retriggerable Monostable Multivibrators with Schmitt-Trigger Inputs
    • Original
    • No
    • Obsolete
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Find it at Findchips.com

    SN74LV123AD datasheet preview

    SN74LV123AD Frequently Asked Questions (FAQs)

    • The SN74LV123AD can handle clock frequencies up to 100 MHz.
    • The SN74LV123AD requires a power supply voltage (VCC) of 2.7V to 3.6V, and it is recommended to use a decoupling capacitor of 0.1uF to 1uF between VCC and GND to ensure proper power supply decoupling.
    • The SN74LV123AD can sink or source up to 24mA of current per output pin.
    • The RST input should be tied to VCC through a pull-up resistor (e.g. 1kΩ) to ensure that the device is properly reset. The RST input should be driven low to reset the device, and then released to allow the device to operate normally.
    • The propagation delay of the SN74LV123AD is typically around 10ns to 15ns, depending on the operating conditions and load capacitance.
    Price & Stock Powered by Findchips Logo
    Supplyframe Tracking Pixel