SN74LVTH18646APM datasheet by Texas Instruments

SN74LVTH18646APM Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74LVTH18646APM?
  The recommended operating voltage range for the SN74LVTH18646APM is 2.3V to 3.6V, with a typical operating voltage of 3.3V.
• How do I ensure signal integrity when using the SN74LVTH18646APM?
  To ensure signal integrity, use a low-impedance PCB design, keep signal traces short, and use termination resistors as needed. Also, follow the recommended layout guidelines in the datasheet.
• Can I use the SN74LVTH18646APM in a 5V system?
  No, the SN74LVTH18646APM is not recommended for use in 5V systems. It is designed for 3.3V or lower voltage systems, and operating it at 5V may cause damage or malfunction.
• How do I handle power sequencing when using the SN74LVTH18646APM?
  Power sequencing is not critical for the SN74LVTH18646APM, but it is recommended to power up the VCC pin before applying input signals, and to power down the VCC pin after removing input signals.
• What is the maximum clock frequency supported by the SN74LVTH18646APM?
  The maximum clock frequency supported by the SN74LVTH18646APM is 100 MHz, but this may vary depending on the specific application and system design.