SN74LVU04ARGYR datasheet by Texas Instruments

SN74LVU04ARGYR Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74LVU04ARGYR?
  The recommended operating voltage range for the SN74LVU04ARGYR is 2.3V to 5.5V, although it can operate down to 1.65V with reduced performance.
• How do I handle the input pins when they are not in use?
  When the input pins are not in use, they should be tied to a valid logic level (either VCC or GND) to prevent them from floating and causing unintended behavior.
• What is the maximum frequency of operation for the SN74LVU04ARGYR?
  The maximum frequency of operation for the SN74LVU04ARGYR is typically around 100 MHz, but this can vary depending on the specific application and operating conditions.
• Can I use the SN74LVU04ARGYR in a 3.3V system?
  Yes, the SN74LVU04ARGYR is compatible with 3.3V systems and can operate with a supply voltage of 3.3V.
• How do I ensure that the SN74LVU04ARGYR is properly powered?
  To ensure proper operation, the SN74LVU04ARGYR should be powered with a clean and stable power supply, and the power pins (VCC and GND) should be decoupled with capacitors to reduce noise and voltage droop.