SN75ALS1178NSR datasheet by Texas Instruments

SN75ALS1178NSR Frequently Asked Questions (FAQs)

• What is the maximum data rate that the SN75ALS1178NSR can support?
  The SN75ALS1178NSR can support data rates up to 100 Mbps.
• Can the SN75ALS1178NSR be used in a multi-point bus configuration?
  Yes, the SN75ALS1178NSR can be used in a multi-point bus configuration, but it requires an external bias resistor to ensure proper operation.
• How do I ensure that the SN75ALS1178NSR is properly terminated?
  To ensure proper termination, a 120-ohm resistor should be connected between the RX+ and RX- pins, and a 120-ohm resistor should be connected between the TX+ and TX- pins.
• What is the maximum cable length that can be used with the SN75ALS1178NSR?
  The maximum cable length that can be used with the SN75ALS1178NSR depends on the specific application and the type of cable used. However, as a general rule, cable lengths up to 10 meters are typically supported.
• Can the SN75ALS1178NSR be used in a half-duplex or full-duplex configuration?
  The SN75ALS1178NSR can be used in either a half-duplex or full-duplex configuration, depending on the specific application requirements.