The maximum cable length supported by the SN75HVD1176DR is dependent on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths of up to 100 meters at a data rate of 100 Mbps.
The SN75HVD1176DR can be configured for half-duplex or full-duplex operation by setting the HDX pin high or low, respectively. When HDX is high, the device operates in half-duplex mode, and when HDX is low, the device operates in full-duplex mode.
The power consumption of the SN75HVD1176DR depends on the operating mode and the data rate. In typical operating conditions, the device consumes around 150 mA at 3.3 V supply voltage. However, this value can vary depending on the specific application and operating conditions.
Yes, the SN75HVD1176DR is rated for operation in industrial temperature ranges from -40°C to 85°C. However, it's essential to ensure that the device is properly derated for temperature and other environmental factors to ensure reliable operation.
To troubleshoot issues with the SN75HVD1176DR, start by checking the power supply voltage, clock frequency, and data transmission rates. Verify that the device is properly configured and that the cables are properly connected. Use oscilloscopes or logic analyzers to monitor the signal quality and identify any errors or anomalies.
SN75HVD1176DR datasheet
by Texas Instruments
Findchips
Findchips