SNJ54HC00W datasheet by Texas Instruments

SNJ54HC00W Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SNJ54HC00W?
  The recommended operating voltage range for the SNJ54HC00W is 2V to 6V, with a typical voltage of 5V.
• How do I handle the input pins when they are not in use?
  When the input pins are not in use, they should be tied to a valid logic level (either VCC or GND) to prevent them from floating and causing unwanted behavior.
• What is the maximum frequency of operation for the SNJ54HC00W?
  The maximum frequency of operation for the SNJ54HC00W is 25 MHz at 5V and 10 MHz at 3.3V.
• How do I ensure that the output signals are not distorted or attenuated?
  To ensure that the output signals are not distorted or attenuated, it is recommended to use a pull-up resistor of 1 kΩ to 10 kΩ on the output pins, and to keep the output load capacitance below 50 pF.
• Can I use the SNJ54HC00W in a 3.3V system?
  Yes, the SNJ54HC00W can be used in a 3.3V system, but the maximum frequency of operation will be reduced to 10 MHz.