The recommended operating temperature range for ST2329QTR is -40°C to 125°C, as specified in the datasheet. However, it's essential to note that the device can operate at temperatures beyond this range, but with reduced performance and reliability.
To ensure reliable communication in noisy environments, it's recommended to use a shielded cable, keep the cable length as short as possible, and use a common ground between the transmitter and receiver. Additionally, consider using a noise filter or a common-mode choke to reduce electromagnetic interference (EMI).
The maximum cable length supported by ST2329QTR depends on the baud rate and the type of cable used. As a general rule, the maximum cable length is approximately 50 feet (15 meters) at 115.2 kbps. However, it's recommended to consult the datasheet and perform tests to determine the optimal cable length for your specific application.
Yes, ST2329QTR can operate with a 3.3V power supply. The device has a wide operating voltage range of 2.7V to 5.5V, making it compatible with 3.3V systems. However, ensure that the input voltage is within the specified range to maintain reliable operation.
The ST2329QTR has built-in flow control capabilities, including RTS/CTS and XON/XOFF. To handle flow control, you need to configure the device accordingly using the relevant registers and pins. Consult the datasheet and application notes for detailed information on implementing flow control in your specific application.
ST2329QTR datasheet
by STMicroelectronics
