The recommended operating temperature range for the ST26025A is -40°C to 125°C.
The ST26025A can be configured for I2C or SPI interface by setting the MODE pin high or low, respectively. For I2C, connect MODE to VCC, and for SPI, connect MODE to GND.
The maximum clock frequency supported by the ST26025A is 10 MHz for I2C and 20 MHz for SPI.
The interrupt output of the ST26025A is an open-drain output, so it requires an external pull-up resistor to VCC. The interrupt is active-low, meaning it goes low when an interrupt event occurs.
The power consumption of the ST26025A in standby mode is typically around 1 μA.
