STD90NH02LT4 Frequently Asked Questions (FAQs)

• What is the maximum operating frequency of the STD90NH02LT4?
  The maximum operating frequency of the STD90NH02LT4 is 100 kHz, but it can be operated at higher frequencies with reduced voltage ratings.
• How do I ensure the STD90NH02LT4 is properly thermally managed?
  To ensure proper thermal management, the STD90NH02LT4 should be mounted on a heat sink with a thermal resistance of less than 1°C/W, and the ambient temperature should be kept below 50°C.
• What is the recommended gate resistor value for the STD90NH02LT4?
  The recommended gate resistor value for the STD90NH02LT4 is between 10 ohms and 100 ohms, depending on the specific application and switching frequency.
• Can the STD90NH02LT4 be used in a bridge configuration?
  Yes, the STD90NH02LT4 can be used in a bridge configuration, but it requires careful consideration of the voltage and current ratings, as well as the thermal management of the device.
• What is the maximum allowed voltage imbalance between the high-side and low-side devices in a bridge configuration?
  The maximum allowed voltage imbalance between the high-side and low-side devices in a bridge configuration is ±10% of the maximum voltage rating of the device.