Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img STM795RM6F datasheet by STMicroelectronics

    • 3 V supervisor with battery switchover
    • Original
    • Yes
    • Unknown
    • Active
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips
    • The STM795RM6F supervisor is a self-contained device which provides microprocessor supervisory functions with the ability to non-volatize and write protect external LPSRAM. A precision voltage reference and comparator monitors the VCC input for an out-of-tolerance condition. When an invalid VCC condition occurs, the reset output (RST) is forced low (or high in the case of RST). These devices also offer a watchdog timer (except for STM704/795/806) as well as a power-fail comparator (except for STM795) to provide the system with an early warning of impending power failure. These devices are available in a standard 8-pin SOIC package or a space-saving 8-pin TSSOP package.

    STM795RM6F datasheet preview
    PCB Symbol, Footprint & 3D Model
    Download Datasheet

    STM795RM6F Frequently Asked Questions (FAQs)

    • The recommended operating temperature range for the STM795RM6F is -40°C to 125°C.
    • The clock source for the STM795RM6F can be configured using the Clock Control Register (CKCU). The clock source can be set to either the internal oscillator, external oscillator, or the PLL clock.
    • The maximum frequency of the STM795RM6F is 32 MHz.
    • The JTAG interface on the STM795RM6F can be enabled by setting the JTAGEN bit in the DBGMCU_CR register.
    • The NVIC is used to handle interrupts generated by peripherals and external events. It allows for efficient handling of interrupts and prioritization of interrupt sources.
    Supplyframe Tracking Pixel