TAS5424BTDKERQ1 datasheet by Texas Instruments

TAS5424BTDKERQ1 Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for the TAS5424BTDKERQ1 to minimize EMI?
  A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the high-current paths short and use a common mode choke to reduce EMI.
• How do I optimize the thermal performance of the TAS5424BTDKERQ1?
  Use a thermal pad on the bottom of the package, and ensure good airflow around the device. A heat sink can also be used to improve thermal performance.
• What is the recommended input capacitor value and type for the TAS5424BTDKERQ1?
  A 10uF to 22uF X5R or X7R ceramic capacitor is recommended for the input capacitor, placed as close to the device as possible.
• How do I protect the TAS5424BTDKERQ1 from overvoltage and undervoltage conditions?
  Use a voltage supervisor or a power-on reset circuit to monitor the input voltage and reset the device if it falls outside the recommended operating range.
• What is the recommended output filter configuration for the TAS5424BTDKERQ1?
  A second-order LC filter with a 1uH inductor and a 10uF capacitor is recommended to filter the output voltage and reduce ripple.